12-16 MAINTENANCE & P ROBLEM SOLVING“Check Message” printoutsWhen there is a problem with a fax call and your machine detects an error, it producesan error printout headed by the words “Check Message”. This printout lists the follow-ing information about the fax transaction:• The resulting error code (See “Error code” next page.)• A communications error message (See “What error messages can mean” below.)• The TTI (or phone number) of the fax machine with which your machine hadattempted to communicate.What error messages can meanThe error messages on Check Message printouts can mean a variety of things. Here is abrief summary:Error message Possible meaningsCheck condition of remote fax. • Remote machine malfunctioned• No fax signals from remote fax• Wrong phone number reachedRepeat transmission. • Poor phone line conditions• No fax signals from remote fax• Document misfeed or miscount• Unable to reach remote machine after attempt-ing specified number of redial triesLine is busy. • Remote machine’s line was busy• Remote machine’s line didn’t answerCheck received documents. • Remote confirmation signal not received fromremote fax• Poor line conditions caused a poor imageMemory full. • Remote fax’s memory is fullDialing number is not set. • Stored phone number failed to dial properlyStopped. • Someone pressed at the remote fax inthe middle of the “Handshake”
