OkiLAN 6200e Plus User’s GuideTCP/IP 100By default, the All Print Servers view is selected andall print servers attached to the subnet of the networkfrom which the OkiNet utility is running are listed.Configuring the Network Print Server UsingOkiNet for TCP/IPThe following steps outline how to configure a NetworkPrint Server. To change settings of a previously config-ured Network Print Server, follow the same procedurebut skip Step 3, as no prompt will appear.1. Select the Network Print Server you wish to config-ure.2. Select Configuration from the Print Server menuor select the Configuration icon on the toolbar.3. When prompted, enter the IP Address of the Net-work Print Server.4. Set the appropriate configuration by choosing theapplicable file folder tabs.The following settings are configurable:
