OkiLAN 6200e Plus User’s GuideTCP/IP 88• Verify the IP address, default gateway and subnetmask are set to the proper values on the NetworkPrint Server by printing a configuration sheet. Thiscan be done using either the print configurationsheet button, through the OkiNet utilities, or via Tel-net• If the settings appear to be correct, try repeatingthe installation steps. If problems persist, call OkiData Customer Support at 1-800-OKI-DATA (1-800-654-3282).TCP/IP Configuration andPrintingTCP/IP Configuration and PrintingOverviewThe Network Print Server supports printing from com-puters using TCP/IP and any of the following printingprotocols:• Line Printer Redirect/Line Printer Daemon (LPR/LPD)• File Transfer Protocol (FTP)• Printing directly through a TCP port (Raw PortPrinting)This chapter presents basic instructions on how toconfigure your computer to print using Remote LPDand FTP. Specific instructions for several popular com-puter systems have been documented in ApplicationConsiderations. If your specific system is notaddressed there, follow the instructions outlined in thischapter. You should also refer to your operating sys-
