OkiLAN 6200e Plus User’s GuideLAN Manager/LAN Server 1683. Associate a print queue with the new local printerport.Once the installation is complete, you can verify com-munication by printing a configuration sheet.Network Preparation• You must have network administrator privileges toinstall the Network Print Server.• You must have physical access to an OS/2 fileserver to host the OKI software utilities.• Write down the serial number and the Ethernetaddress of your Network Print Server. You can findthe information on the test printout.• OS/2 and LAN Manager/LAN Server must be con-figured with the following protocol: DLC/802.2 pro-tocol stack• LAN Manager users must enable the remote bootfacility.• LAN Server 2.X users must run the LAN Serverinstallation utility and select the 802.2 protocol.• LAN Server 3.0 users must run the LAPS utility andselect the 802.2 protocol.• OS/2 Warp Users must run the MPTS utility andselect the 80w.w protocol. See your networkadministrator or the LAN Manager/LAN Servermanuals for instructions.• The initial installation requires the file server to bebrought down and then back up again. This may bea consideration when you are planning your install.
