Oki OKIPAGE 12i User Manual

Also see for OKIPAGE 12i Series: User guide Brochure & specs User guide User guide User guide

Contents

1410 Base-T Ethernet network adapter card1 Log in to the NetWare file server from supervisor account.2 Start PCONSOLE from the NetWare file server volume at MS-DOS Prompt.3 Open “Print Server Information ”from “Available Options” window.4 Select the print server for which you are changing the notificationsettings from “Print Servers” window and press Return key.5 Select “Print Server Configuration” from “Print Server Informa-tion” window and press Return key.6 Select “Notify List for Printer” from “Print Server ConfigurationMenu” window and press Return key.7 Select the printer name for which you are changing the notifica-tion settings from “Defined printers” window and press Returnkey. Notification message is displayed to users displayed in thewindow opened here. If no user name is displayed here, no no-tification is issued. To confirm or change the notification interval,please proceed to 8.8 The settings of the notification interval are displayed in “First”and “Next” columns of the user list opened in 7 above. “First”shows the time to issue the first notice and “Next” shows theissuance interval from one notice to the next notice. The time isexpressed in seconds.9 To change the notification interval, select target user(s) from theuser list opened in 7 above and press Return key. Change “First”and “Next” to desired times on “Notify Interval” window, pressESC key, select “Yes” on “Save changes” window and press Re-turn key.0 To delete the user(s) to be notified, select the target user(s) fromthe user list opened in 7 above and press Delete key. Select“Yes” on “Delete Object From Notify List” and press Return key.A To add a user to be notified, press Insert key with the user listopen state in 7 above. Select user(s) or a group you wish toadd from “Notify Candidate” window and press Return key. Then“Notify Intervals” window is displayed. Enter time of your choicein “First” and “Next” and press ESC key. Select “Yes” on “Savechanges” window and press Return key.B After you confirm the notification settings and/or complete chang-ing of the settings, end PCONSOLE.C Restart the print server to make the setting changes effective