173. NETWORK SET UP FOR EACH OPERATION SYSTEM3 Click “Assign” button.4 Click “Add...” button and open the “Select object” screen.5 Open the directory where the print queue to which the printer isto be connected is located, from the “Directory context:” list.6 From the text box “Object:”, select the print queue to which theprinter is to be connected. Then the print queue name is dis-played in the text box “Selected object:”. Click “OK” button.7 Click “Set environment” button on “Printer: ‘Printer name:’” screen.8 Change the text box “Printer type:” to “Others/unknown”.Caution: You must set this as described. If you omit this, thisnetwork card will not run.9 Click “OK” button to return to the NWADMIN’s main window.6. To connect the printer to the print server1 On the NWADMIN’s main window, click the print server to whichyou wish to connect the printer, to select it.2 Select “Details...” from the “Object” menu and open “Print server:‘Print server name’” screen.3 Enter the print server name in “Advertising name”.4 Click “Assign” button.5 Click “Add...” button and open the “Select object” screen.6 Open the directory where the printer which you wish to connectto the print server is located, from the “Directory context:” list.7 Select the printer you wish to connect to the print server, from thetext box “Object:”. Then the printer name is displayed in the textbox “Selected object:”. Click “OK” button.Items to be confirmed after the print environment has been set upWhen you complete the environment setting with NWADMIN, please con-firm the following items once more:PrintQueue:Open “Assign” and confirm that the print server and the printer that youhave set are displayed in “Administered Print Servers” and “Printers forwhich print queues are serviced”, respectively.If they are not displayed, do the setting once again in the Print Server andPrinter “Details” window.
