735. INSTALLING UTILITY5 Select “UTILITY Deletion” and click “Next” button to executeUNINSTALL.Caution: Immediately after the Utility is deleted, the folder where LPRUtility is installed and the spool folder remain visible on theExplore, but they will disappear when you execute “Refresh” in“View” menu of the Explore.5.2.6 Registering the printer to LPR Utility or deleting the printerfrom there5.2.6.1 Registering LPR printerYou will register the printer to be used in LPR UTILITY. If you register theprinter to LPR Utility, the output destination of the printer driver that hasbeen registered will be set in the spool directory created at the time ofLPR Utility Installation.1 Double-click “Oki LPR UTILITY” icon on the “Oki LPR UTILITY”window.2 Select “ADD PRINTER...” in the “REMOTE PRINT” menu on the“Oki LPR UTILITY” window.3 Select the printer driver “OKIPAGE 12i” from “PRINTER:”, andenter the IP address of the printer in “IP ADDR:”.4 Click “OK” button, and “OKIPAGE 12i” will be added to “Oki LPRUTILITY” main window. You can add other printer drivers usingthe steps from 1 through 4.5 Open the Printer folder in the Control Panel of Windows 95, andopen the Properties of the printer driver you registered in “ADDPRINTER...”. If “C:¥MLSPOOL¥MLLPR00 (unknown local port)”is displayed for “Print to the following port:” of the “Details” win-dow, the printer registration was performed correctly. (Directoryof the port to print to varies with the directory specified at Install.)Caution: You can register up to 10 printers in the LPR Utility.5.2.6.2 Setting LPR printer’s IP addressAfter completing registering the printer driver, set the LPR printer’s IPAddress.
