5010 Base-T Ethernet network adapter cardAre you re-setting ? (y/n) : n [RET]OkiPage> logout (or exit, quit)[RET]→ Enter an appropriate command, without logging out, if you wantto set other protocols, too.4.1.4 Printer administration using the SNMP Manager (HPOpenView)OKIPAGE 12i and this network card support Management InformationBase (MIB, hereafter).MIB is information that is sent/received between the managing host andthe devices that are managed, with SNMP protocol, for the network man-agement, defined in RFC1213 (MIB II).The structure of the MIB is expressed by Abstract Syntax Notation One(ASN.1), and normally the results of compilation to the C-Language sourceusing the ASN.1 compiler are used in a management software and adevice to which it is incorporated.For the OKIPAGE 12i , please use an ASN.1 file comes with this Networkcard, or whitch is downloaded from OKIDATA Home Page(http://www.okidata.com/).For the OKIPAGE 12i, please use a compiler comes with the SNMPManager.Of the MIBs defined by various RFCs, OKIPAGE 12i supports PrivateMIB only.By reading or rewriting MIB values using the various SNMP tools that usethe SNMP protocol, you can manage printers on the network. This Manualexplains how to refer to, set and change MIB, using the Open View Net-work Node Manager of Hewlet Packard Corporation.4.1.4.1 Referring to MIB’s set values and changing set values4.1.4.1.1 Referring to the MIB’s set valuesUsing the Network Node Manager attached to the HP OpenView, youcan check the current settings of the main unit of the OKIPAGE 12i printerconnected to the network or Network card.
