876. TROUBLE SHOOTING6.4 Important Points6.4.1 Common• To set IP address, you must consult the network administrator. Ifthe same IP address is used by multiple machines, a serious er-ror will result on network.• It will take about 30 seconds to change the settings of this net-work card.6.4.2 When inserting and removing Network card• Before you insert/remove the Network card, you must turn theprinter off. (See Section 2.1.)• Insert the Network card all the way. (See Section 2.1.)6.4.3 When setting in NetWare3.1x environment• You must set Printer Types of Remote Printer to “Remote Other/Unknown”. (See Section 3.2.3.1.)• To use the OKIPAGE 12i printer in Queue Server Mode, do notuse the password for the print server. (See Section 3.2.3.2.)• This Network card does not support the Banner Sheet in the QueueServer Mode. (See Section 3.2.3.2.)• If the printer connection cutoff message is issued very often in theRemote Printer Mode, change the notification settings withPCONSOLE. (See Section 3.2.3.3.)6.4.4 When setting in NetWare4.1x environment• You must set Printer Types of Remote Printer to “Remote Other/Unknown”. (See Section 3.2.4.1 or 3.2.4.2.)• Set the printer number of Remote Printer to any number 0 through15. (See Section 3.2.4.1 or 3.2.4.2.)
