d-Color MF552/452/362/282/222 15-1915[Book Original] ([Public]/[Personal]/[Group]) ([Save])To display: [Box] - Select a User Box to save the file - [Save] - [Application] - [Book Original]You can scan two-page spreads such as books and catalogs separately into the left and right pages, or scanas one page.If you place a book or catalog on the Original Glass, you do not need to close the ADF to scan it.Settings Description[ON]/[OFF] Select [ON] to specify Book Original.[Output Method] Specify the scanning method for book spread originals.• [Book Spread]: Scans a book spread original as it is.• [Separation]: Scan the right and left pages of two-page spreads sepa-rately in the order of the page numbers.• [Front Cover]: Scans the front cover and two-page spreads accordingto the page order of the original (scans the front cover first then two-page spreads).• [Front & Back Covers]: Scans the front and back covers and two-pagespreads according to the page order of the original (scans the frontcover first, then the back cover, followed by two-page spreads).[Binding Position] If [Separation], [Front Cover] or [Front & Back Covers] is selected for [Out-put Method], select the spreading direction of the original to be scanned.Select [Left Bind] for two-page spreads of left binding, and [Right Bind] fortwo-page spreads of right binding.Note that if the binding position is incorrectly specified, the page order ofthe two-page spread is reversed between the left- and right-hand pages.[Frame Erase] Erases the shadow of the surrounding that is created when the originalcover cannot be closed properly due to the thickness of the original.You can erase the four sides of the original to the same width. Also, youcan erase the four sides of the original to different widths.• [Frame]: Select this option to erase the four sides of the original to thesame width. In [Erase Amount], tap [+]/[-] for the inch area, or tap [+]/[-] or press the Keypad for the centimeter area to specify the width of thearea to be erased.• [Individual]: Select this option to erase the four sides of the original todifferent widths. Select a side ([Top], [Bottom], [Left] or [Right]) andspecify the width of the area to be deleted for each side in [EraseAmount] by tapping [+]/[-] for an inch area and by tapping [+]/[-] orpressing the Keypad for a centimeter area. Likewise, specify the widthfor all the other sides one by one.If you do not want to erase the side, cancel the setting for [Erase].[Center Erase] Erases the shadow created in the center when the original cover cannot beclosed properly due to the thickness of the original.Specify the width of the area to erase by tapping [+]/[-] for the inch area, orby tapping [+]/[-] or pressing the Keypad for the centimeter area.
