Section 3 PREPARATIONS3-3NoteWhen loading paper into the drawer, set it so that theside that is to be copied faces upwards.6 Set the accompanying paper sheet so that the paper size setin the drawer can be identified from the front of the drawer.7 Gently push in the drawer.NoteWhen the copier will not be used for a long period of time,remove the paper from the drawer or feeder, put it in astorage bag and seal the bag in order to protect the paperfrom humidity.Drawer Size DetectionSet the Size Detection on the operation panel to match the size ofthe paper loaded in the drawer. The copier has been set at the timeof shipping for automatic detection in inch units for inchspecifications, or in centimeter units (A⋅B columns) for metricspecifications.1 Press the [Paper Select] key for 3 seconds. The DefaultSettings Mode will be displayed.Inch specifications Metric specifications2 Press either the Zoom (+) or Zoom (–) key to display the“F17 (Drawer 1 Paper Size)”.Inch specifications Metric specificationsNoteWhen setting the size of the optional drawer (2 - 4),display F18 (Drawer 2 Paper Size), F19 (Drawer 3 PaperSize) and F20 (Drawer 4 Paper Size).3 Press the [Enter] key.Inch specifications Metric specifications4 Press either the Zoom (+) key or the Zoom (–) key and selectthe drawer size. The drawer sizes displayed are as given inthe table below.Inch specifications Metric specificationsDisplay Drawer Size(AtI) Automatic Detection in inch units(AtC) Automatic Detection in centimeterunits (A⋅B columns)(o2r) Oficio II
