Section 6 COPIER MANAGEMENT6-20Selected DrawerWhen the optional Paper Feeder is installed, priority will beassigned to the drawer that is selected automatically. Manualpaper feeding cannot be set using the Selected Drawer function.1 Display the Default Settings Mode. (Refer to P.6-11"Default Settings Mode Operations Procedures".)Inch specifications Metric specifications2 Press either the Zoom (+) or Zoom (–) key to display “F14”.Inch specifications Metric specifications3 Press the [Enter] key.Inch specifications Metric specifications4 Press either the Zoom (+) key or the Zoom (–) key and selectthe drawer to be given priority for use.Inch specifications Metric specificationsNoteThe range of selection will vary in accordance with thenumber of drawers installed.5 Press the [Enter] key.The display will return to that of Step 2.Inch specifications Metric specificationsAuto Drawer SwitchingWhen the optional Paper Feeder has been installed, select whetheror not to use the Auto Drawer Switching function.1 Display the Default Settings Mode. (Refer to P.6-11"Default Settings Mode Operations Procedures".)Inch specifications Metric specifications2 Press either the Zoom (+) or Zoom (–) key to display “F15”.Inch specifications Metric specifications3 Press the [Enter] key.Inch specifications Metric specifications
