Section 5 COPY FUNCTIONS5-34 Press the [Start] key.The copier will begin scanning the original.When an original has been set in the optional DocumentProcessor copying will begin automatically.When the original has been set on the platen and thescanning of the original completed, “1-” (No. of OriginalsRead In) is displayed and the 2-Sided Copy display blinks.When this occurs, carry out the following procedure.Inch specifications Metric specifications5 Replace the original with the next one and press the [Start]key.The copier will scan the original.6 If there are no more originals to be scanned, press eitherthe 2-Sided Copy key or the [Enter] key.The copier will begin copying.2-Sided Copy Reverse Side Rotation SettingFollow the procedure below to change the rotation setting for thereverse side when making 2-Sided copies.1 Press the 2-Sided Copy key for 3 seconds.The Default Setting Mode for the reverse side setting of2-Sided Copies will be displayed.2 Press either the Zoom (+) or Zoom (–) key and select either“on” in the case where the reverse side is to be rotated or“oFF” when it isn’t to be rotated.Inch specifications Metric specifications3 Press the [Enter] key.The display will blink and the copier will return to the statewhere copying can be continued.Inch specifications Metric specifications
