Olivetti d-Copia 16 Operation Manual

Contents

Olivetti d-Copia 16 Operation Manual Manual pdf 97 page image

Section 8 TROUBLESHOOTING8-3Stop copying operations when a paper misfeed occurs. When apaper misfeed occurs, the indicator for the location of the papermisfeed will light up on the Operation Panel and either “J” plus a2-digit number or “PF” will be displayed as notification of thelocation of the paper misfeed.With the Power Switch in the ON (|) position, refer to P.8-3"Removal Procedure" and clear the paper misfeed.Inch specifications Metric specificationsMisfeed location indicators(1) Paper misfeed in the paper supply section – Refer toP.8-3.(2) Paper misfeed in the left cover internal section – Referto P.8-4.(3) Paper misfeed in the optional Document Processor –Refer to P.8-5.(4) Paper misfeed in the optional drawer – Refer to P.8-6.Cautions* Do not attempt to reuse paper that has jammed before.* When a sheet gets torn during removal, make sure that theremnants do not remain in the machine. Failure to completelyremove remnants of torn pages can lead to paper misfeeds.* The copier will start warm up operations after the paper misfeedprocessing has been completed. The paper misfeed indicatorlamp will go off and the copier will be restored to the state it wasin before the paper misfeed occurred.Removal ProcedurePaper misfeed in the paper supply sectionPaper misfeed in the drawer (J11, J21)When the paper misfeed location is lit as shown in the illustrationbelow, the paper misfeed has occurred in the drawer. Use theprocedure below to clear it.Inch specifications Metric specifications1 Pull the drawer out.If paper jamsWARNINGThe electrically charged section inside the mainunit of the copier uses high voltage. Exercisecaution in handling it to prevent electric shock.(3)(2)(1)(4)CAUTIONThe fixation section inside the main unit of thecopier is extremely hot. Exercise caution inhandling it to prevent getting burned.