Olympus DS-7000 Instructions Manual

Also see for DS-7000: Installation instructions Instructions Instructions

Contents

224ENHands-free recording/ Recording monitorThe recorder can be used as a hands-free recordingdevice. To set up the recorder for hands-freeoperation, connect the optional Olympus FootSwitch to the back of the docking station and placethe recorder in the docking station as shown in theillustration below.You can set the Hands-free function of the recorderto [Dictation] (default) of [ Transcription] by usingthe customize functions of the ODMS software(☞ P.44). Using the ODMS software you can alsochange the functions of the foot pedals.For more details, refer to the online help for ODMSsoftware (☞ P.47).It is possible to monitor your recording by listeningto it even while the recording is in progress. In orderto do so, insert the earphone plug into the earphonejack and use the + or – buttons to control the volumelevel.Notes• When connecting an earphone or an externalmicrophone’s plug, insert the plug all the way inas shown in the illustration above.• To avoid irritation to the ear, insert the earphoneafter turning down the volume level.• Do not place earphones near a microphone as thismay cause feedback.+, − (Volume) buttonHands-free recording Recording monitorNotes• Move the slide switch to the STOP ( 4) positionbefore connecting it to the docking station forhands-free recording.• To record with better quality using the hands-freerecording function, set the microphone sensitivityto [Conference] mode (☞ P.37), or use an externalmicrophone.