Olympus DS-7000 Instructions Manual

Also see for DS-7000: Installation instructions Instructions Instructions

Contents

494ENConnecting to your PCConnecting to your PCConnecting to your PC using the docking stationPlace the recorder in the docking station1 Connect the USB cable to the USB port of the PC.2 Connect the USB cable to the docking station as shown in theillustration.3 Set the recorder in the docking station.• [Remote (Composite)] is displayed on the recorder if the USB cable isconnected.• If the AC adapter is connected as well, power will be supplied from theAC adapter.Disconnecting from your PCWindows1 Click [ ] on the task bar located at the lower-right corner ofthe screen. Click [Safely remove USB Mass Storage Device].• The drive letter will differ depending on the PC being used.2 Confirm that the record indicator light turns off beforedisconnecting the USB cable.Macintosh1 Drag and drop the recorder’s drive icon for this recorderdisplayed on the desktop to the Recycle Bin icon.2 Confirm that the record indicator light turns off beforedisconnecting the USB cable.Notes• NEVER remove the card or disconnect the USB cable while the recordindicator light is flashing. If you do, the data will be destroyed.• Never touch the contact points at the bottom of the docking station, asthat may cause bad connection.• With a PC connected, the recorder cannot be operated with the FootSwitch. When connecting the recorder to a PC via the docking station,remove the Foot Switch.