Direct printing (PictBridge)103Printing pictures8Use the USB cable provided to connect the camera to a PictBridge-compatible printer.1 Turn the printer on and plug theUSB cable into the printer’s USBport.• For details of how to turn the printer onand the position of the USB port, refer tothe printer’s instruction manual.2 Plug the USB cable into thecamera’s multi-connector.• The monitor turns on and theselection screen for the USBconnection is displayed.3 Select [PRINT] and presse.• After "ONE MOMENT" screen appears,the camera and the printer will beconnected.4 Select [ALL IMAGES] or [ALBUM] and press e.• ALL IMAGES: Select from all pictures in the card and print.• ALBUM:Select the picture from the album entry and print.If you selected [ALBUM], you cannot select [PRINT ORDER] in thePRINT MODE SELECT screen.Connecting the camera to a printerNote• If [PC] is selected, screen will not change to next screen. Remove the USBcable and repeat the procedure from step 1 again.• If [EXIT] is selected, the camera is not recognized by the printer and turns off.ConnectorcoverMulti-connectorHook your finger on thispart and pull open theconnector cover.USBSELECT GO OKP CPRINTEXIT