Direct printing (PictBridge)1108Printing picturesIf an error code appears on the camera’s monitor during direct print setting orprinting, see the following table.For more details, refer to the printer’s instruction manual.If an error code is displayedMonitor indication Possible cause Corrective actionNO CONNECTIONThe camera is not connectedto the printer correctly.Disconnect the camera andconnect it again correctly.NO PAPERThere is no paper in theprinter.Load some paper in theprinter.NO INKThe printer has run out ofink.Replace the ink cartridge inthe printer.JAMMED The paper is jammed. Remove the jammed paper.SETTINGS CHANGEDThe printer’s paper cassettehas been removed or theprinter has been operated whilemaking settings on the camera.Do not operate the printerwhile making settings on thecamera.PRINT ERRORThere is a problem with theprinter and/or camera.Turn off camera and printer.Check the printer andremedy any problems beforeturning the power on again.CANNOT PRINTPictures recorded on othercameras may not be printedon this camera.Use a computer to print.TIPS• If an error code other than those shown above is displayed, see “Errorcodes” (P.134).r