Troubleshooting13910 AppendixThe picture is too dark.The flash was blockedby your finger.Hold the camera correctly, keeping yourfingers away from the flash.P.22The subject was out ofthe working range of theflash.Shoot within the flash working range. P.41The flash was set to [$]. Select a flash mode other than [$]. –The subject was toosmall and was backlit.Set the flash to fill-in mode, or use the spotmetering mode.P.41, 45The sequential shootingmode was used.Higher shutter speeds are used duringsequential shooting, which may result inpictures that are darker than usual. Set[DRIVE] to [o] in the mode menu.P.54The center of the subjectis too bright.If the center of the subject is too bright, theimage as a whole emerges darker. Adjust theexposure compensation toward plus (+).P.47The colors of pictures look unnatural.Indoor lighting affectedthe picture’s colors.Set the white balance according to thelighting.P.48No white in the picture. Include something white in the picture, orshoot using the fill-in flash mode.P.41The white balancesetting is wrong.Adjust the white balance according to thelight source.P.48Part of the picture is dark.The lens was partlyblocked by your finger orthe strap.Hold the camera correctly, keeping yourfingers and the strap away from the lens.P.22Possible cause Corrective action Ref.page
