846PlaybackPlayback on a TVUse the AV cable provided with the camera to play back recorded imageson your TV. You can play back both still pictures and movies on your TV.1 Make sure that the TV and camera are turned off. Connect themulti-connector on the camera to the video input terminal onthe TV using the AV cable provided with the camera.2 Turn the TV on and set it to the video input mode.• For details of switching to video input, refer to your TV’s instruction manual.3 Press the POWER switch to turn the camera on.• The last picture taken is displayed on the TV. Use the arrow pad to selectthe picture you want to display.TIPS• You are recommended to use the optional AC adapter when playing backpictures on a TV.• The close-up playback, index display and auto playback functions can alsobe used on a TV screen.Note• Make sure that the camera’s video output signal type is the same as the TV’svideo signal type. g“Video output selection” (P.85)• The camera’s monitor turns off automatically when the AV cable is connectedto the camera.• Be sure to use the AV cable provided to connect the camera to the TV.• The picture may appear off-center on the TV screen.Mode dialConnect to the TV’s video input(yellow) and audio input (white)terminals.AV cable(provided)Connector coverMulti-connectorHook your finger on thispart and pull open theconnector cover.
