Recording sound826PlaybackSound can be added to a still picture that you have already taken. (This isknown as “after-recording”.) You can also re-record over the sound thathas already been recorded. Total recording time per picture isapproximately 4 seconds.Select the still picture to which you want to add sound.Top menu [MODE MENU] [PLAY] [R] g“Menus” (P.15)1 Press d to display [START].2 Aim the camera microphonetoward the sound you want torecord and press e to startrecording.• The [BUSY] bar is displayed duringrecording.Note• Trimming is not possible in the following cases.Movies, or when there is insufficient memory space on the card.• If a trimmed picture is printed out, it may appear grainy.Note• If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may notbe recorded properly.• If you re-record the sound, the original sound is erased.• You may not be able to record sound when there is insufficient card memory(the “CARD FULL” message is displayed).• Sound recording may pick up camera noises, such as button operation orshutter movement.• Once sound is added to a picture, it is not possible to erase only the sound. Inthis case, make a re-recording with silence.Recording soundMode dialy<R0INFOEDITCARDSET PLAYSTARTMicrophone
