13410AppendixTroubleshootingError codesMonitor indication Possible cause Corrective actionqNO CARDThe card is not inserted,or it cannot berecognized.Insert a card, or remove the cardand insert it again correctly.If the problem persists, format thecard. If the card cannot beformatted, use a new card.qCARD ERRORThere is a problem withthe card.This card cannot be used. Insert anew card.qWRITE-PROTECTWriting to the card isprohibited.The recorded image has beenprotected (read-only) on a computer.Download the image to a computerand cancel the read-only setting.qCARD FULLThe image capacity orrecording capacity ofthe card has beenreached and no morepictures or movies canbe taken.Replace the card or erase unwantedpictures. Before erasing, downloadimportant images to a computer.qCARD FULLThe card is full. No moreinformation such asprint reservations orediting the still picturescan be recorded.Replace the card or erase unwantedpictures. Before erasing, downloadimportant images to a computer.gBATTERYEMPTYThe battery is empty. Charge the battery.LNO PICTUREThere are no pictureson the card.The card contains no pictures.Record pictures.rPICTUREERRORThere is a problem withthe selected picture andit cannot be played backon this camera.Use image processing software toview the picture on a computer. Ifthat cannot be done, the image fileis damaged.CARD-COVEROPENThe batterycompartment/cardcover is open.Close the battery compartment/cardcover.Y/M/DWhen the camera is usedfor the first time or thebattery has beenremoved for a long time,the date and time are onthe factory default setting.Set the date and time.This card cannot beused with this cameraor the card is notformatted.Replace the card or format the card.• Select [POWER OFF] and presse. Insert a new card.• Select [FORMAT] and press e.All data on the card is erased.CARD SETUPPOWER OFFFORMATSELECT GO OK
