Omnia ONE Installation And Operation Manual

Also see for ONE: Installation and operation manual Installation and operation manual

Contents

Omnia ONE Installation And Operation Manual Manual pdf 101 page image

82PresetOmnia.ONE is equipped with a selection of factory presets that can be used to instantly configure the processing forcommon applications. The currently loaded preset is displayed to the right of Preset: on the top line of the MainMenu.Highlighting Preset: and clicking the jog wheel (see Using the Jog Wheel on Page 10) will open the Preset menu.Rotating the jog wheel will scroll through all of the factory presets as well as any user presets that have been storedwithin the unit’s non-volatile memory. The currently loaded preset will appear with square brackets around it.Clicking the jog wheel will load the displayed preset into the Omnia.ONE, instantly setting the various processingparameters.To exit the Preset menu without loading a preset, rotate the jog wheel clockwise until *cancel* is displayed andclick.By alternately loading different presets you may compare the sound between them.Here in the Preset: menu, you may select and load presets to use, but not save, delete, or rename them. Thoseoperations may be accomplished from within the Processing menu.ProcessingHighlighting and clicking Processing from the main menu opens up the Processing menu that contains theseoptions: Adjust Processing, Save Preset, Delete Preset, Rename Preset and <-Exit. This is where the sound of theOmnia.ONE can be fine-tuned and customized. Once customized, this is also where your user presets are saved,deleted and renamed. Each submenu in the Adjust Processing menu can be highlighted, clicked to open, and theindividual controls within can be adjusted to individual taste.Since you cannot build a preset from scratch, a factory preset must be used as a starting point for creating your“signature sound.” Each processor parameter may be adjusted to taste as required. Once the processing is adjusted,the Save Preset function is used to store your changes as a new user preset to non-volatile internal memory. Thefactory presets cannot be overwritten.Using the Delete Preset and Rename Preset options, existing user presets may be deleted from memory or renamedas needed. The original factory presets can never be deleted or renamed.We will discuss the Save Preset, Delete Preset, Rename Preset and <-Exit options first before delving into thedetails of the Adjust Processing menu.Save PresetThis option saves any changes you have made to the currently running preset into the Omnia.ONE’s non-volatilememory. Changes can be saved over an existing user preset (without renaming it) or as a new user preset with a newname. You may not save a factory preset over itself with the same name and attempting this will generate the errormessage: “Cannot overwrite factory preset. Save preset with new name.”Preset names can contain up to 10 characters.To save your changes proceed as follows:Highlight Save Preset and click. “Name” will be highlighted and the Name field will automatically display theexisting preset name. If you wish to overwrite this existing preset with your changes, just rotate the jog wheelclockwise to highlight the Save button and click. Your changes will be saved to the existing preset.