Omnia ONE Installation And Operation Manual

Also see for ONE: Installation and operation manual Installation and operation manual

Contents

Omnia ONE Installation And Operation Manual Manual pdf 76 page image

57AdministrativeAbout Presents a dialog displaying the Omnia.ONE software style, firmware release version and frontpanel software version currently active in the unit.Contrast Adjusts the contrast of the front panel LCD display to optimize it for various viewing angles.Network ConfigurationAllows customization of the network interface configuration. Available parameters are:IP (IP Address)Accepts data in the form of four octets to describe the Ipv4 network address assigned tothe Omnia.ONE’s network interface. The entries have the form of:[ octet] . [ octet] . [ octet ] . [ octet] which when entered may appear as a network address such as:192 . 168 . 0 . 200Subnet (Subnet Mask)Accepts data in the form of four octets to describe the Ipv4 network subnet mask of theOmnia.ONE’s network interface. The entries have the form of:[ octet] . [ octet] . [ octet ] . [ octet] which when entered may appear as a network address such as:255 . 255 . 255 . 0GatewayAccepts data in the form of four octets to describe the Ipv4 gateway address assigned tothe Omnia.ONE’s network interface. The entries have the form of:[ octet] . [ octet] . [ octet ] . [ octet] which when entered may appear as a network address such as:192 . 168 . 0 . 1<-ExitClick on this option to return to the Administrative menu.RebootWhen selected, initiates a complete system reset, which includes reloading the internal operatingsystem, DSP processing code, and values from the current processing preset and IO configuration.SecurityRemote Con (Remote Control)[Enabled] Enables remote control access.[Disabled] Disables remote control access.Enter PasswordSets the password for both the front panel and remote control access.The default password is “omnia” (all lower case)