Omnia ONE Installation And Operation Manual

Also see for ONE: Installation and operation manual Installation and operation manual

Contents

Omnia ONE Installation And Operation Manual Manual pdf 156 page image

137There are 6 “tabs” in the FM style Remote Control applet: Preset, Processing, In, Out, IO and Encode.Preset TabTo enter the Preset menu, clickon the “Preset” tab and thePreset dialog will appear:From the Preset menu, you canselect, save and delete presetsstored in the Omnia.ONE unit.These are the same operationsthat can be performed from theOmnia.ONE’s front panel, butconsolidated on a single menu.To select a preset and put it “on the air”, double-click on it in the preset list, or highlight it and click “Select”.Note: In the current software, when selecting presets from the remote, the Preset: name will not be refreshed on theOmnia.ONE’s front panel. To refresh the front panel preset name, simply click the Omnia.ONE’s jog wheel to enterone of the menus and then click “<-Exit”. (Or enter the Preset menu, rotate the Jog Wheel to the right and select“Cancel*”To save changes to the currently running user preset (as shown in the gray status bar at the bottom of the remotewindow), click the “Save Current” button. It does not matter what preset is highlighted in the preset list. Thecurrently running preset will be updated with your changes.To save the current settings as a new preset, click the “Save Current As” button. A new applet window will openwith a dialog box where you can type the name of the new preset. For convenience, there is also a dropdown menuwhere you can select an existing preset name to start with. Once the new preset name appears as desired, click the“Save” button. The new preset will be saved to the unit and will appear in the preset list. To cancel without saving,simply close the applet window.To delete a preset, click the “Delete Preset” button. A new applet window will open with a preset list. Highlight thepreset to be deleted in this preset list and click the “Delete” button. The preset will be instantly deleted from the unitand the preset list. To cancel without deleting any presets, simply close the applet window.Processing TabClick on the “Processing” tab and the block diagram will appear: