Panasonic AG-CPD15P Operating Instructions Manual

Also see for AG-CPD15P: Operating instructions

Contents

Panasonic AG-CPD15P Operating Instructions Manual Manual pdf 47 page image

R ETUR N MENUCONTROL PA N ELON/OFF47Operation Using the RemoteControl Panel (separately sold)Control Reference Guide of the Remote Control PanelFront panelLCD panelShows images and operation menus.AUTO ZOOM button∗1, 2Provides automatic control of zoom-in,pause and zoom-out operation.The officer can set zoom ratio andpause time. (see “Zooming” on page 55)BOOK MARK button∗2Press during recording or playbackto enter bookmarks. A set bookmarkdisplays an icon on the displayfor 1 to 2 seconds when pressed.(see “Adding bookmarks” on pages64, 67)Backlight compensation button( )∗1, 2Press to compensate for strongbacklighting. This button togglesbetween ON and OFF at each press.(see “Making a backlit image easierto view” on page 55)Zoom buttons∗1, 2Use these buttons to zoom out (W-button) and zoom in (T-button).(see “Zooming” on page 55)REC lampLights or flashes during recording.(see “Indicator Lamps and RecorderStatus” on page 110)REC button∗2Press to start recording video andsound to P2 card. (see “Startingrecording” on page 63)STOP button ( )∗2Stops recording. (see “Stoppingrecording” on page 63)AUDIO2 MUTE button/lampStarts/releases recording for Audio2.Pressing this button turns the lampon/off. While the lamp is lit, Audio2is not being recorded. (see “To muteAudio2 input sound” on page 55)IR MODE button∗1Switches the IR mode to one of thefollowing modes.AUTO: Automatically changes IR modedepending on ambient brightness.ON: Turns on the IR mode.OFF: Turns off the IR mode.CAMERA SELECT buttonEach press of the button toggles therecorder between the [CAMERA1]and [CAMERA2] connector inputs.(see “Selecting a camera” on page 55)Volume control buttons ( )Adjusts speaker sound volume.Brightness buttons ( )Adjusts LCD panel brightness.∗1 A commercially available camera connected to the [CAMERA2] connector cannot be controlled.∗2 The lamp turns on when the [CONTROL PANEL ON/OFF] button is set to ON.Additional Informationon Operation