Panasonic AG-CPD15P Operating Instructions Manual

Also see for AG-CPD15P: Operating instructions

Contents

Panasonic AG-CPD15P Operating Instructions Manual Manual pdf 72 page image

72Viewing error log dataUse the following procedure to open adialog showing up to five of the mostrecent errors.1. Perform steps 1 to 3 in“Viewing P2 card type andsoftware version”.2. This selects [Last Errors].Press the [ ] button to accept.This dialog shows the most recenterror data (the items listed below).• Month/day (MM/DD)• Hour/minute (HH : MM)• Error No.• Error type (Fatal Error/Error)• Error message (the first 40characters appear)Notes:• Error data with a low priority is alsodisplayed.• The following error numbers donot appear as error log data.E08601, E28201 to E282033. Use the [ , ] buttons to select[Reboot] and press [ ] toconfirm the entry.The Reboot confirmation screenappears.4. Use the [ , ] buttons to select“Reboot” and press [ ] toconfirm the entry.A reboot takes between 40 to 50seconds to complete.Should the operating status of this unitbecome unstable, use the followingsteps to reboot this unit.1. Press the [MENU] button.The Menu appears.2. Use the [ , ] buttons to select[Setup/Info] and press [ ] toconfirm the entry.Viewing P2 card type andsoftware version1. Press the [MENU] button.The Menu appears.2. Use the [ , ] buttons to select[Setup/Info] and press [ ] toconfirm the entry.3. Use the [ , ] buttons to select[Information] and press [ ] toconfirm the entry.• This displays P2 card model andcard information. The followinginformation appears depending onP2 card type.P2 cards:- UNFORMATTED- CARD PROTECT- REFORMAT- CARD ERROR- CARD FULL- RUNDOWN- ∗∗Days(∗∗: Number of recording days(see “Format” on page 86))Cards other than P2 cards:- VUP CARD- NO CARD- ILLEGAL CARD• This opens the product informationscreen that contains the softwareversion information.Displaying Product InformationRebooting this unit