75Administrator Operations on theRemote Control Panel (separately sold)Rec/PlayPowerOff TimeUse this function to set the intervalafter which the Remote ControlPanel and this unit will shut downafter the ignition switch has beenset to the LOCK (OFF) position.Setting (min.):0, 10, 20, 30, 60, 90, 120,180, AUTO∗1Init Camera SelectSelect the camera selected at power-on.1: Color Camera connected tothe [CAMERA1] connector2: Commercially available cameraconnected to the [CAMERA2]connectorLAST: See footnote.∗2Init Audio2 In SelectSelect the Audio2 sound input atpower-on.INCAR : Sound input through the[IN CAR MIC] connectorWMIC : Sound input through the[AUDIO IN 2] connectorLINK CAM : Being linked with thechange of camera, soundinput changes.∗3LAST : See footnote.∗2PowerOn RecUse this function to set recording tostart when this unit is turned on.Setting : ON, OFFLoop RecSetting : OFF fixedIntermittent RecUse this function to record∗4 onevideo frame per second.Setting : ON, OFFResolution/RecRateUse this function to set the screenresolution and the recording rate.Q-512kbps :320 × 240 512 kbps 30 fpsQ-1Mbps :320 × 240 1 Mbps 30 fpsF-1Mbps :720 × 480 1 Mbps 10 fpsF-2Mbps :720 × 480 2 Mbps 30 fpsAdministrator Setup (continued)∗1 When recorder operation is not controlled by a PC application:Power is turned off immediately. Note, however, that power is not turnedoff while data is exported to a USB memory device, but is turned off aftercompletion of data export.When recorder operation is controlled by a PC application:Power is turned off when control from a PC application is released, or whenthe PC card slot cover is opened.∗2 Applies the setting in effect when power was last turned off. Unless power isturned off properly, the operating state may not be saved correctly.∗3 Changing to the [CAMERA1 (CAMERA2)] connector input, sound comes from the[AUDIO IN 2 (IN CAR MIC)] connector input.∗4 Normal recording records 10 or 30 video and audio frames per second.