20Setting panel screen[INTVideo] internal video setting screenPower supply and backupThe operation panel settings are stored in the memory when the power is turned off.The default settings are established when the power is turned back on by selecting [Power] > [Reset] on the [Setup] initialsetting screen, and the system is started from the settings which were established at the completion of the previous sessionby selecting [Power] > [Preset]. If [Demo] has been selected on the [Setup] panel, the demonstration mode is establishedwhen the power is turned on.Select [Reset] or [Preset] on the [Setup] panel from the demonstration mode to restart the system. The demonstration modecan be exited using [Enter].The panel settings, setup settings and their files, key learn settings and event memory data are saved. These settings anddata are backed up by the flash memory even when the power is turned off.Wash Pb 128 Pr 128Y 128Event ME Time Pattern INT00E 10:00F 3015 BlueINT Video Grade Pos 80BackMatteColorBarMemory Page1Frame1F FieldModeWriteColorWhiteLevel255PatternH1Grade0WhtYelwCyanGrenMgtRedBlueBlkCst1Cst2CL BrSt 1-30Mv 1-30The internal video settings are performed on this screen.This menu is selected when the INTVideo button below the LCD display is pressed. It is not selected using INT at acrosspoint. While these settings are performed, the color setting mode is established for joystick XYZ and rotary Z control.The color set appears at the top right.Setting items[Back Matte], [Color Bar] and [Memory] are selected using the rotary 1 control.The unit’s various functions are adjusted on the setting panel screen. This screen is basically configured as follows.≥ Displayed at the top level of the screen are the joystick XY and rotary Z values and the audio meter.≥ Displayed at the second level of the screen from the top are the event number, transition time, pattern number andinternal video setting.≥ Displayed at the third level of the screen from the top are the title of the menu on the display and the item setting ranges.≥ The settings are displayed from the center down. The settings of four items are displayed per page. If there are morethan four item settings, they can be scrolled and displayed using the rotary 1 or 2 control. Two lines are allocated toeach item, and 7 or so alphanumerics are displayed per item. In some cases, abbreviations are used for the displays.≥ The display of selected setting item is highlighted in reverse video.≥ Selected setting items are returned to their default settings using [Shift] + [.].R1 R2 R3 R4 R5