Panasonic AG-MX70 Operating Instructions Manual

Also see for AGMX70 - AV SWITCHER: Brochure & specs

Contents

55[Setup] initial setting screen[Memory] settingThis is used to set the memories used for INTVideo andDSK. When the setting is changed, all the memories arecleared. How much memory is to be used for [INT V] andhow much for [Title] for DSK and TitleKey is set using therotary 2 and 3 controls.If the allocation to one memory is changed, the allocation tothe other memory will change so that the total remains 30.When a change is to be made, [OK?] appears. Execute thechange using [Enter], and use [Shift] + [Enter] to cancel.The default setting is 15 each for [INT V] and [Title] withNTSC and 13 each for [INT V] and [Title] with PAL.Memory INT V30Title00 - 30/26 0 - 30/26[Gen Lock] external synchronization settingSelect [G/L] or [ExtKey] as the [Ref] (reference) sourceusing the rotary 2 control. The default setting is [G/L].Adjust the [H Phase] (horizontal phase) using the rotary 3control. The default setting is 128.Adjust the [SC Phase] (subcarrier phase) using the rotary 4control. The default setting is 512.[H Phase] and [SC Phase] are stored in the memoryseparately in accordance with [G/L] or [Ext Key] for theinput.GenLockRefG/LH Phase128SC Phase512G/LExt Key28 - 228[Video Format] settingEither [NTSC] or [PAL] is selected as the format by therotary 2 control.The default setting is the format used in the area where thesystem was purchased.When a change is to be made, [OK?] appears. Execute thechange using [Enter], and use [Shift] + [Enter] to cancel.Set [4:3] or [16:9] as the [Aspect] ratio of the patterns usingthe rotary 3 control. The default setting is [4:3].VideoFormat NTSCAspect4:3Setup0Pb PrBetaNSTCPAL4:316:907.5BetaM20 - 1023R1 R2 R3 R4 R5R1 R2 R3 R4 R5R1 R2 R3 R4 R5Select [0] or [7.5] for [Setup] using the rotary 4 control. The default setting is [0].Select [Beta] or [M2] for the [Pb Pr] component level using the rotary 5 control. The default setting is [Beta].When the NTSC or PAL format is changed, the system is initialized, and the [INT V] and title memories are cleared.