Panasonic AG-MX70 Operating Instructions Manual

Also see for AGMX70 - AV SWITCHER: Brochure & specs

Contents

98[OTHER]Editor: D-sub 9-pin, RS-422A/232C switchableRS-422A protocol; GVG/Sony switchableConnectable Editor: Panasonic: AG-A850, AJ-A900,SONY: BVE-2000, BVE-910, PVE-500Tally Out: D-sub 9-pin, open-collector k 8 chCollector current: Less than 50 mA,Maximum voltage: 35 V DCGPI: BNC k 1, Make-contactUSB: Type-B connector k 1, USB Ver.1.1 (cable length: max. 3 m)Specifications[VIDEO INPUT/OUTPUT]Analog component input/output connectors: BNC a 4 (sources 1/2/3/4)Y: 1.0 Vp-p, 75 hPb/Pr (525): 0.525/0.757 Vp-p switchable, 75 hPb/Pr (625): 0.7 Vp-p, 75 hAnalog composite input/output connectors: BNC a 8 (sources 1 to 8), 1.0 Vp-p, 75 hYC input/output connectors: Mini-DIN4 a 4 (sources 1/2/3/4)Y: 1.0 VP-P, 75 hC: 0.286 VP-P, 75 h (525)/0.3 VP-P, 75 h (625)EXT (external input) connector: BNC a 1 (Y/Pb/Pr), Analog component signalsY: 1.0 Vp-p, 75 hPb/Pr (525): 0.757 Vp-p, 75 hPb/Pr (625): 0.7 Vp-p, 75 hKey: BNC a 1, 1.0 Vp-p, 75 hAnalog composite signals (genlock possible)G/L input connector: BNC a 1 (with loop-through configuration), 1.0 Vp-p, 75 hComposite signal (genlock selection enabled from G/L, EXT-Key)Preview output connector: BNC a 1, 1.0 Vp-p, 75 hAdvanced reference input connector: BNC a 1 (with loop-through configuration), 75 h,composite signalsSync: 0.286 Vp-p (525)/0.3 VP-P (625)Burst: 0.286 Vp-p (525)/0.3 Vp-p (625)[AUDIO INPUT/OUTPUT]Analog audio (L/R) connectors: XLR a 4 sets, +4/0/–3 dBu switchable, 10 kh, balancedAUX input (L/R) connectors: RCA a 2 sets, –10 dBV, 10 kh, unbalanced (AUX2 switchablewith MIC)Audio output (L/R) connectors: Program 1: XLR a 1 set, +4/0/–3 dBu switchable, 47 h,balancedProgram 2: RCA a 1 set, 10 dBv, 47 h, unbalancedMic input jack: M6 a 1, –60 dBv, 2 kh, unbalanced (switchable with AUX2)Headphone output jack: M6 a 1, 8 kh, unbalanced