Panasonic AG-MX70 Operating Instructions Manual

Also see for AGMX70 - AV SWITCHER: Brochure & specs

Contents

33≥ When [Trail] has been setSet the trail color and spark using the rotary 3 control.Select the [Self] original image, [Self-spark], [BodM]border color or [BodM-spark] border spark.The time can be set to any value from 1 to 32 using therotary 4 control.When trail has been set, the trail offset position can be setby setting the position while holding down [Shift]. In thiscase, the center, scene grabber and hold buttons flashtemporarily. Whichever trail or shadow effect wasselected last among trail and shadow for DSK, and multistrobe and decay for A/B videoEffects takes effect, andthe previous effect is canceled.Only one of three settings—namely, soft, border or soft border—for both multi strobe and pattern edges can be selectedwhen a special pattern has been selected. For further details, refer to the note on page 26.EffectsTrailTime16LightOnLightswhen 3Dboard hasbeeninstalled.SelfSelf-sparkBodMBodM-spark1 - 32SelfEffectsOffLightOnOffShadowTrailLightswhen 3Dboard hasbeeninstalled.EffectsShadowLightOnLightswhen 3Dboard hasbeeninstalled.[Effects] settingThis is used to perform the DVE settings.Select the [Off], [Shadow] or [Trail] effect using the rotary 2control.Set the [Light] (lighting) using the rotary 5 control. This isvalid only when the 3D optional board (AG-VE70) has beeninstalled for use.≥ When [Shadow] has been setWhen [Shadow] has been selected, the shadow positioncan be set by setting the position while holding down[Shift].In this case, the center, scene grabber and hold buttonsflash temporarily.R1 R2 R3 R4 R5R1 R2 R3 R4 R5R1 R2 R3 R4 R5Effect-by-effect setting screens