45If the PAGE button and DATA+ button or DATA– button are pressed when the CHARA H-POS or CHARAV-POS item has been set, the counter display appears temporarily while these buttons are held down toenable the setting to be checked.Even while the PAGE button is pressed, the settings can be performed using the DATA+ button or DATA–button while the actual status is checked.000 KEY-INH SEL000000010002DISST&EJENAFor setting the switches which can still be operated on the front panel whenthe KEY INHIBIT switch has been set to ON.0: None of the switches can be operated.1: Only the STOP and EJECT switches can be operated.2: All the switches can be operated.003 DISPLAY SEL0000000100020003TIMET&STAT&RT&S&RFor setting what is to be displayed by superimposing onto the video monitoroutput.0: Only the time is displayed.1: The time and operation status are displayed.2: The time and amount of remaining tape are displayed.3: The time, operation status and amount of remaining tape are displayed.004 CHARA H-POS 000000040008048For setting the character position in the horizontal direction for thesuperimposed display.005 CHARA V-POS 001300221322For setting the character position in the vertical direction for thesuperimposed display.006 CHARA TYPE00000001WHITEW/OUTFor setting the type of superimposed display and menu display.0: White characters are displayed on a black background.1: White characters with black borders are displayed.007 SYS FORMAT0000000150M25M008 PB FORMAT00000001MANUALAUTOFor setting the format during tape playback.0: The format is based on the setting selected for menu item No. 007 (SYSFORMAT).1: The format recorded on the tape is used.030 AUDIO P.SAVE000000010002ALLON3/4ONOFFFor setting the power save mode during recording.0: The audio outputs of all four channels (CH1, CH2, CH3 and CH4) aretemporarily suspended.1: The audio outputs of two channels (CH3 and CH4) are temporarilysuspended.2: All the sound is output.BASIC menuItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining indicates the factory setting.Setup MenusFor setting the unit’s recording and playback format.0: 50 Mbps mode1: 25 Mbps modeWhen the 25 Mbps mode is set, the sound is recorded and played back ontwo channels (CH1 and CH2).
