51704 EMPHASIS 00000001OFFONFor setting the emphasis ON or OFF.705 MONI SEL00000001PLYPCMPLYCUE730 DOUBLE REC00000001OFFON732 LIMITER CH100000001OFFONFor setting the CH1 audio limiter operation.0: The limiter does not operate.1: The limiter operates.733 LIMITER CH200000001OFFONFor setting the CH2 audio limiter operation.0: The limiter does not operate.1: The limiter operates.734 LIMITER CH300000001OFFONFor setting the CH3 audio limiter operation.0: The limiter does not operate.1: The limiter operates.735 LIMITER CH400000001OFFONFor setting the CH4 audio limiter operation.0: The limiter does not operate.1: The limiter operates.736 MIC LOWCUTCH100000001OFFONFor setting the high-pass filter of the CH1 microphone ON or OFF.737 MIC LOWCUTCH200000001OFFONFor setting the high-pass filter of the CH2 microphone ON or OFF.738 MIC LOWCUTCH300000001OFFONFor setting the high-pass filter of the CH3 microphone ON or OFF.739 MIC LOWCUTCH400000001OFFONFor setting the high-pass filter of the CH4 microphone ON or OFF.706 REC CUE000000010002CH1CH2CH1+2For setting the audio input signals which are to be recorded on the cuetrack.0: CH1 input signals are recorded.1: CH2 input signals are recorded.2: CH1 and CH2 input signals are mixed and recorded.731 MONI OUT000000010002000300040005CH1CH2CH3CH4CH1+2CH3+4AUDIO menuItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining indicates the factory setting.Setup MenusFor setting whether the CH1 and CH2 input signals are to be recordedsimultaneously on CH3 and CH4.(This item is valid only in the 50 Mbps mode.)0: The signals are not recorded simultaneously.(The CH3 and CH4 inputs signals are recorded on CH3 and CH4.)1: The signals are recorded simultaneously.For setting the audio signals which are to be output from the AUDIO OUTconnectors (PHONO), HEADPHONE jack and EARPHONE jack duringPLAY (FWD a1).0: PCM audio signals are output.1: Cue audio signals are output.For setting the audio signals to be monitored at the AUDIO OUT connectors(PHONO) when PLYPCM has been selected as the No. 705 setting.The cue audio signals are always output when PLYCUE has been selectedas the No. 705 setting.0: The audio signals of CH1 are monitored.1: The audio signals of CH2 are monitored.2: The audio signals of CH3 are monitored.3: The audio signals of CH4 are monitored.4: The audio signals of CH1 and CH2 are mixed and monitored.5: The audio signals of CH3 and CH4 are mixed and monitored.