Panasonic AJ-D92P Operating Instructions Manual

Contents

50601 V-MUTE SEL00000001N-MUTELOW RFFor setting whether to mute the video signals when LOW RF or NO RF hasoccurred during playback.0: The video signals are not muted (the picture is frozen).1: The video signal picture is muted (the screen turns gray).VIDEO menuItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining indicates the factory setting.Setup Menus608 SET UP 25 .. For setting the setup processing for the composite IN/OUT and componentIN signals when the 25 Mbps mode is selected.00 CMPST IN00000001THRUCUTFor setting the setup processing for the composite input signals.0: The original signals are input as they stand.1: The 7.5 % setup is eliminated from the input signals, which are theninput.01 CMPST OUT00000001THRUADDFor setting the setup processing for the composite output signals.0: The original signals are output as they stand.1: The 7.5 % setup is added to the output signals, which are then output.02 CMPNT IN00000001THRUCUTFor setting the setup processing for the component input signals.0: The original signals are input as they stand.1: The 7.5 % setup is eliminated from the input signals, which are theninput.609 SET UP 50 .. For setting the setup processing for the composite IN/OUT and componentIN signals when the 50 Mbps mode is selected.00 CMPST IN00000001THRUCUTFor setting the setup processing for the composite input signals.0: The original signals are input as they stand.1: The 7.5 % setup is eliminated from the input signals, which are theninput.01 CMPST OUT00000001THRUADDFor setting the setup processing for the composite output signals.0: The original signals are output as they stand.1: The 7.5 % setup is added to the output signals, which are then output.02 CMPNT IN00000001THRUCUTFor setting the setup processing for the component input signals.0: The original signals are input as they stand.1: The 7.5 % setup is eliminated from the input signals, which are theninput.