Panasonic AJ-D92P Operating Instructions Manual

Contents

48400 STILL TIMER 0000000100020003000400050006000700080.5S5S10S20S30S40S50S1min2minFor setting the time taken until the tape protection mode is establishedwhen the unit has been left standing in the stop or still mode.(Unit: S = seconds, min = minutes)401 SRC PROTECT00000001STEPHALFFor setting the tape protection mode operation when the unit has been leftstanding in the still mode.0: STEP FWD1: STANDBY OFF (HALF LOADING)If STEP FWD has been selected, the unit is automatically transferred to theSTANDBY OFF (HALF LOADING) mode when the total length of time it hasbeen left standing in the still mode reaches 30 minutes.403 STOP PROTECT00000001STEPHALFFor setting the tape protection mode operation when the unit has been leftstanding in the stop mode.0: STEP FWD1: STANDBY OFF (HALF LOADING)If STEP FWD has been selected, the unit is automatically transferred to theSTANDBY OFF (HALF LOADING) mode when the total length of time it hasbeen left standing in the still mode reaches 30 minutes.402 DRUM STDBY00000001OFFONFor setting the drum operation in the STANDBY OFF (HALF LOADING)mode.0: The drum rotation is stopped.1: The drum rotation is continued.TAPE PROTECT menuItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining indicates the factory setting.Setup Menus200 ID SEL00000001OTHERDVCPROFor setting the ID information to be returned to the controller.0: 20 25H is returned.1: The DVCPRO unit’s own ID (F0 33H) is returned.INTERFACE menuItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining indicates the factory setting.