19Recording and playing (continued)Switch the write-protect switch of the P2 card to[PROTECT].Protecting against a possible erasure P2 card access LEDs and P2 card statusPROTECTWrite-protect switchP2 card statusP2 cardaccess LEDRecording and play are possible.Green lightingThe memory card recorder is accessingto record or play.Orange flashingRecording and play are possible.The card is selected for recording.Orange lightingThe memory card recorder is readingcard information.Quick orangeflashingThe card has no remaining recordingcapacity (play is possible).Green flashing The write-protect switch is switched toPROTECT (play is possible).The data format on the card is notstandard. Change the card.OffThe card is not formatted normally.Format the card again.No card is inserted.Note:The statuses of the P2 cards can be verified in detail.Refer to “Contents of P2 Card Status Display Settings”on page 32.Notes:• Any attempt to change the position of the write-protectswitch during recording or playback or while the carddata is being accessed will have no effect until therecording or playback is completed or the card data isno longer being accessed.• When the REC INH switch on the upper front panel isset to [ON], recording onto any of the P2 cards isinhibited, but it is still possible to format, delete clips andset shot marks to ON or OFF.When the write-protect switch on the P2 card is set to[PROTECT], all write operations including recording,formatting and clip deletion are inhibited.