Panasonic AJ-SPD850E Operating Instructions Manual

Also see for AJ-SPD850E: Parts list Operating instructions

Panasonic AJ-SPD850E Operating Instructions Manual Manual pdf 34 page image

34Play ListDifferences between normal playback andplay list playbackNormal playbackIn the example shown below, clips 1-3 are on P2 card 1,and clips 3-5 are on P2 card 2.Note:If a recording is split between two P2 cards, thesegments are labeled as shown below, where clip 3is split between clip 3-1 and clip3-2. Playback iscontinuous from the current position except duringplay list playback.The start of the previous (or next) clip is locatedwhen the REW (or FF) button is pressed whileholding down the SHIFT button, but in the case of aclip which is split between two cards, the start ofclip3-2 is also located.Play list playbackSet IN/OUT positions at the locations on the P2 cardwhich are to be played to create a play list. Next, duringplay list playback, just the required segments are playedbased on the play list.P2 Card 1P2 Card 2Clip 1 Clip 2 Clip 3-1Clip 3-2 Clip 4 Clip 5Current position ContinuousplaybackContinuous playbackP2 Card 1P2 Card 2Clip 1 Clip 2 Clip 3-1Clip 3-2 Clip 4 Clip 5Continuous playback based on play list(when executed starting with event A)event A event BIN OUT IN OUTIN OUTevent Cevent Aevent Bevent C Play list playbackUsing the play listSwitch and submenu selectionsPlay list buttonsPLAY LIST EVENT INSERTDELETEGO TOENTRY OUTIN• PLAYLIST button (self-lighting)This button is used when creating a play list, and toplay data based on a created play list. When the buttonis pressed in the stop mode, a play list is displayed.The button light remains on while a play list is beingcreated or played.• EVENT button (self-lighting)When the button is pressed while the PLAYLIST buttonlight is on, the mode changes to play list event(IN/OUT) setting mode. In this mode, the screen showsvideo output, and the IN/OUT point TC and eventnumber are shown in captions.• INSERT buttonThis button is used to add a new event while the playlist summary is displayed. Move the pointer to theevent you want to insert in the play list display(PLAYLIST button light is on), then press the INSERTbutton to add the new event.• DELETE [SHIFT + INSERT] buttonThis button is used to delete an event while the play listsummary is displayed. Move the pointer to the eventyou want to delete from the play list display (PLAYLISTbutton light is on), highlight it using the SET button, anddelete it by pressing this button.• GO TO buttonThis button is used to find the IN and OUT points ofindividual events registered in the play list. While theplay list is displayed (PLAYLIST button light is on),select an event and press the GO TO button whileholding down the IN button (or OUT button) to movethe IN point (or OUT point). A still image is shown onthe screen. Further, when the GO TO button is pressedwhile holding down the SHIFT button, the selectedevent can be moved.• ENTRY buttonThis button is used to create a play list event. Whenthis button and the IN (or OUT) button are pressed atthe same time in play list creation mode (both thePLAYLIST button and EVENT button lights are on), anevent IN point (or OUT point) can be set.• IN (OUT) buttonThis button is used to create a play list event. Whenthis button and the ENTRY button are pressed at thesame time in play list creation mode (both thePLAYLIST button and EVENT button lights are on), anevent IN point (or OUT point) can be set. When thisbutton and the RESET button are pressed at the sametime, the IN point (or OUT point) of the selected eventcan be deleted.The play list function enables only particular parts of theimages and sound recorded on five P2 cards to be selectedand the selected parts to be played in any order using onlythe unit by operating the IN, OUT and ENTRY buttons onthe front panel.Note:The maximum number of events which can beregistered using this unit is 100.