58Setup menus (continued)No./Item DescriptionUSER menu 800ADD LINE 25Sub-screen00REC LINE1This selects the additional line wherethe signals are to be recorded.[625i system]0000 7L: :0002 9L: :0015 22L0016 320L: :0031 335L0032 623L[525i system]0000 10L: :0002 12L: :0012 22L0013 263L0014 273L: :0025 284L0026 525L01REC LINE2This selects the additional line wherethe signals are to be recorded.Note:This menu option is not displayed whenadditional line mode setting “1” through“5” has been selected.[625i system]0000 7L: :0015 22L0016 320L: :0018 322L: :0031 335L0032 623L[525i system]0000 10L: :0012 22L0013 263L0014 273L: :0016 275L: :0025 284L0026 525LNo./Item DescriptionThe underlined items indicates the initial setting.This selects the mode for recordingsignals on additional lines.0000 OFF :No signals are recorded on additionallines.0001 YC422 :The 422 mode signals are recordedon 1 line.0002 YC411 :The 411 mode signals are recordedon 1 line.0003 Y1_B/W :Only the Y signal is recorded on 1 linedirectly.0004 Y1_BPF :Only the Y signal is recorded on 1 line afterit has been separated from the C signal.0005 C1 :Only the C signal is recorded on 1line.0006 Y2_B/W :Only the Y signal is recorded on 2lines directly.0007 Y2_BPF :Only the Y signal is recorded on 2lines after it has been separated fromthe C signal.0008 C2 :Only the C signal is recorded on 2lines.Notes:• When a setting from “0001 (YC422)” to“0008 (C2)” is selected and the STOPbutton is pressed, operation transfers tothe sub-screen, and the recording lineor lines can be selected.To return from the sub-screen, pressthe STOP button again.• The setting takes effect when thesystem format is 25 Mbps.75525M RECCHUsed to select the number of AUDIOchannels for DVCPRO (25 Mbps) orDV (25 Mbps) recording.0000 2CH:Records on two channels.0001 4CH :Records on four channels.Note:Four-channel recording is always usedwith DVCPRO50 (50 Mbps).
