Panasonic AJ-SPD850E Operating Instructions Manual

Also see for AJ-SPD850E: Parts list Operating instructions

Panasonic AJ-SPD850E Operating Instructions Manual Manual pdf 8 page image

Multifunctional interface• Analog video input/outputBoth composite and component signal inputs/outputsare provided.• AES/EBU audio input/outputDigital audio input and output connectors are provided.• Serial digital input/outputFit the optional SDI interface board (optional: AJ-YA755G) to enable interfacing of the serial digitalcomponent signals.• IEEE1394 digital input/outputFit the optional IEEE1394 interface board (optional:AJ-YAD850G) to enable input/output interfacing ofIEEE1394 digital signals.• RS232C remoteA RS232C remote connector is provided.• USB 2.0By connecting a personal computer with USB 2.0, youcan use the P2 cards in the memory card recorder asmass storage. You will need to install the USB driveronto your computer.• LANYou can connect to a network with a 100BASE-TX/10BASE-T.4-channel, high-sound-quality digital audioThe 4-channel PCM audio enables independentrecording for all four channels in addition to channelmixing.Menu-based setupPerform setup while viewing the setup menus on thememory card recorder’s display (vacuum fluorescentdisplay), the 3.5-inch LCD, or a TV monitor connectedthrough an OUT 3 connector.Rack mountingUse the optional rack adapter (AJ-MA75P) to attach this4U-sized deck to a 19-inch rack.Features8Recording and play of files on memory cardsThe memory card recorder can record to and play videoand audio on memory cards (such as the AJ-P2C002SGwhich is sold separately; henceforth referred to as “P2cards”) in the DVCPRO50, DVCPRO, and DVcompression formats. Video and audio data is recordedon the cards in the form of MXF file (SMPTE390M) andclip meta data in XML.5 PC card slotsThe unit comes with five PC card slots into which you caninsert PC card type II cards. You can record and playaudio and video material on the P2 cards you haveinserted into these slots.Video monitorThe 3.5-inch color LCD monitor allows to find and playvideo, using such features as the thumbnail screen.Play list featureUse the IN/OUT and ENTRY buttons on the front panel tocreate and play play lists. Just choose the parts you wantrecorded on any of the five P2 cards in the memory cardrecorder, and put them in the order you want them toplay. You can then record these play lists to an SDmemory card.Dial jog/Dial shuttleThe jog makes it possible to play in slow motion at ratesbetween –1.0 and +1.0. The shuttle allows high speedplay in either direction at up to 100 times normal speed.At speeds up to 10 x, the sound is also audible.Time codes/player function for editingThe memory card recorder has a built-in time codegenerator (TCG) and time code reader (TCR).In addition to the internal time code, external time codeinput or input signal VITC can be recorded on thememory card recorder as the time code. The memorycard recorder can also be used as a player for an editingsystem with RS-422A.Video encoder controlThe encoder controls on the front panel allow you toadjust the video output level, chroma, setup, and hue(chroma phase).Switching between 525i and 625i TV systemsSelect the TV system (525i or 625i in setup menu No.070) to match the video input signal to play and recordthe different TV system signals.