Panasonic AW-HE120KE Operating Instructions Manual

Also see for AW-HE120KE: Operating instructions Operating instructions

Contents

Panasonic AW-HE120KE Operating Instructions Manual Manual pdf 15 page image

15ShootingManual shooting Manually adjusting the focusThe lens focus can be adjusted manually.When performing the operationsusing the wireless remote control1 Press the [M/FOCUS] button to switch thefocus to manual adjustment.2 Press the [F] or [N] button of [FOCUS], andadjust the focus.When the [F] button is pressed, the focus moves furtheraway (far); conversely, when the [N] button is pressed, itmoves nearer (near).The speed of focusing and other adjustments canbe switched to fast or slow by pressing the [FAST] or[SLOW] button, respectively.3 If necessary, press the [A/FOCUS] button toreturn the focus to the automatic adjustment.When performing the operations using the controllerWhen the AW-RP655 is connected:1 Press the [EXT(AF)] button to switch the focusto manual adjustment.2 Adjust the focus manually by turning the dialabove the lit [FOCUS] lamp whether it is thelamp of the [PAN/TILT] lever or [ZOOM] lever.Furthermore, every time the [SPEED] button is pressed,the speed of the focusing and other adjustments can beswitched to fast or slow.3 If necessary, press the [EXT(AF)] button toreturn the focus to the automatic adjustment.When the AW-RP555 is connected:1 Press the [EXT(AF)] button to switch the focusto manual adjustment.2 Adjust the focus manually by tilting the[FOCUS] lever.Furthermore, every time the [SPEED] button is pressed,the speed of the focusing and other adjustments can beswitched to fast or slow.3 If necessary, press the [EXT(AF)] button toreturn the focus to the automatic adjustment.When the AW-RP50 is connected:Refer to the Operating Instructions of the controller. When the focus is set to manual, the subject maygo out of focus during panning, tilting and zooming.Therefore, the unit comes with a function whichcompensates for this. (Focus compensation duringzooming function: Focus ADJ With PTZ.)This function was set to ON at the factory.If the function has been set to OFF, either adjust thefocus, as required, after zooming or set the focus toauto. (See page 49 and page 73.)Note