Panasonic AW-HE120KE Operating Instructions Manual

Also see for AW-HE120KE: Operating instructions Operating instructions

Contents

Panasonic AW-HE120KE Operating Instructions Manual Manual pdf 34 page image

34Basic operations (continued) Control exercised from the Multi Hybrid Control Panel AW-RP555For switching White Balance ModeA, B or ATW.For switching the SCENE file(Scene1 to Scene4).For operating the cameramenus.MENU: For displaying andexitingthe cameramenus.ITEM: For entering the menuitems and settings.YES, NO:For moving the cursor orchanging the settings.For selecting the camerasto be operated.For switching the Iris mode. *3Each time the [EXT(AF)]button is pressed, the focussetting is switched betweenauto focus and manual focus.When auto focus is selected,the [EXT(AF)] button lights.When the focus settingis switched between autofocusing and manual focusingby the camera menu or by theother controller, the resultingstatus (lamp on or off) will notbe reflected in the button.Each time the [MODE] button is pressed,the setting is switched between CAMand BAR.The [MODE] button lights up at the BARsetting.Each time the [GAIN] button is pressed,the setting is switched in the sequenceof GAIN AUTO0dBL (9dB)H(18dB), and the mode is displayed by theLEDs as shown below.[ON: LED lights; OFF: LED off]GAINbutton MANU LLED MANU HLEDAUTO ON OFF OFF0dB OFF OFF OFFLOW OFF ON OFFHIGH OFF OFF ONOthers OFF ON ONShutter mode selectionEach time this button is pressed, one of the shuttermodes set by the controller or “shutter OFF” is selected.The [SHUTTER] button lights up in all modes exceptshutter OFF.The shutter mode settings established by the [PRESET]buttons are as follows.MODE PRESET No. MODE PRESET No.1/100**11/120**2 PRESET1 1/10000 PRESET71/250 PRESET2 SYNCHRO-SCAN PRESET81/500 PRESET31/1000 PRESET4 ELC PRESET91/2000 PRESET5 OFF PRESET101/4000 PRESET6**1: “1/100” when 59.94 Hz is selected as the frequency settingof the AW-HE120.**2: “1/120” when 50 Hz is selected as the frequency setting ofthe AW-HE120.The lamp of this buttonflashes when an alarm (FanError) has been received fromthe camera. *5For executing ABB. *1, *4*6For executing AWB. *1, *2*1: The lamp of the AWC or ABC switch flashes whileautomatic white balance or automatic black balanceis being executed, respectively. When AWB or ABBis completed successfully, the corresponding lampgoes off; when it is not completed successfully, itlights up.*2: The switch lights without AWB being executed whenthe white balance mode of the main unit is ATW,3200K, or 5600K, or when the Color Bar is beingdisplayed.*3: When AUTO setting is established for the iris mode,this control can be used to adjust Picture Level;when MANU setting is established, it can be used toadjust the iris.*4: The switch lights without ABB being executed whenthe Color Bar is being displayed.*5: Flashing stops when communication isdisconnected because the OPERATE switch hasbeen turned OFF, CAMERA SELECT has beenswitched, the communication cable has beendisconnected, etc.*6: The ND button cannot be used.Perform the operations using the camera menu.