Panasonic AW-HE120KE Operating Instructions Manual

Also see for AW-HE120KE: Operating instructions Operating instructions

Contents

Panasonic AW-HE120KE Operating Instructions Manual Manual pdf 28 page image

28Genlock adjustment Genlock adjustmentThe genlock adjustment is performed to achieve phasealignment by applying external synchronization (genlock)when a multiple number of cameras will be used or when theunit will be used in combination with other devices.This unit supports BBS (Black Burst Sync) and tri-level syncexternal synchronization signals.Ask your dealer to perform this adjustment.(Use a dual-trace oscilloscope for the adjustment.) Horizontal phase adjustmentObserve the waveforms of the external sync signal input( tri-level sync signal) and video signal output on thedual-trace oscilloscope, and use the wireless remote controlor controller to bring the horizontal phase into alignment.External sync signalinput (tri-level syncsignal)Video signal outputBring the horizontal phase into alignment.Example: When the tri-level sync phase is adjustedWhen performing the operationsusing the wireless remote control1 Follow the operation steps in “Basicoperations” (page 31) to display the Top Menu.2 Press the [] or [] button to bring the cursorto “System”.Top MenuCamera Scene: Scene1SystemMaintenance3 Press the [] button.The “System” sub-menu is displayed.SystemGenlockOutputOtherReturn4 Press the [] or [] button to bring the cursorto “Genlock”, and press the [] button.The “Genlock” sub-menu is displayed.GenlockHorizontal Phase 0Horizontal Phase Step 1Return5 Press the [] or [] button to bring the cursorto “Horizontal Phase”, and press the [] button.The “Horizontal Phase” value starts blinking.6 Press the [] or [] button to change the“Horizontal Phase” value, adjust the valueso that the horizontal phase is brought intoalignment, and press the [] button.The extent of the phase adjustment can be selectedusing “Horizontal Phase Step”.7 Press the [MENU] button for 2 seconds.The camera menu display is exited.When performing the operations using the controllerThese operations can be performed using the cameramenus by following the operation steps in “Basic operations”(pages 29 to 36).