Panasonic AW-HE120KE Operating Instructions Manual

Also see for AW-HE120KE: Operating instructions Operating instructions

Contents

Panasonic AW-HE120KE Operating Instructions Manual Manual pdf 46 page image

46Setting the camera menu items (continued) Output screenOutputFormat 1080/59.94p(i)Down CONV. Mode SqueezeHDMI Color YCbCr422Component YPbPrFrequency 59.94HzColor Bars Setup OffReturnFormat[1080/59.94p(i), 1080/59.94i, 720/59.94p,480/59.94p(i), 480/59.94i, 1080/50p(i), 1080/50i,720/50p, 576/50p(i), 576/50i]The video format is changed on this screen.For details on how to change the format, refer to“Changing the format” (page 47).In the case of the 1080/59.94p(i) or 1080/50p(i) format,the P signal is output to the HDMI connector, and theI signal is output to the SDI output and analog componentoutput connectors.Down CONV. Mode[Squeeze, SideCut, LetterBox]The down-conversion mode is selected here.SqueezeThis setting is used when the aspect ratioof the monitor is to be set to 16:9.If the monitor is set to the 4:3 aspectratio, the images will be squeezed in thewidth direction and extended in the heightdirection.SideCutThis setting is used when the aspect ratioof the monitor is to be set to 4:3.With the vertical height serving as thereference, the parts which extend beyondthis at the two sides are cropped changingthe view of the angle.LetterBoxThis setting is used when the aspect ratioof the monitor is to be set to 4:3.With the horizontal width serving as thereference, black bands are added at thetop and bottom changing the view of theangle. When output is selected for the color bar, the mode is fixedto Squeeze.HDMI Color[RGB-NOR, RGB-ENH, YCbCr422, YCbCr444]Set here is the HDMI color output. When an HDMI monitor is used, use “YCbCr422” undernormal circumstances. In cases where, for instance, HDMI (RGB) signals areconverted and output to a DVI monitor, the settingsrequired will differ depending on the color gradationsupported by the monitor.RGB-NOR The RGB output signals are output in the16 to 235 range.RGB-ENH The RGB output signals are output in the0 to 255 range. If the black parts of the images appear overexposedwhen “RGB-NOR” has been selected, use the“RGB-ENH” setting instead. Conversely, if the images are displayed with a loss ofdark detail when “RGB-ENH” has been selected, usethe “RGB-NOR” setting instead. If an HDMI Color setting which is not supported bythe monitor has been specified, the HDMI Colorsetting may be changed automatically.(The menu display will remain unchanged.)NoteComponent [YPbPr, RGB]Either Y/Pb/Pr or RGB can be selected for the analogcomponent signals.Frequency [59.94Hz, 50Hz]This item is selected to switch the frame frequency. When the frequency is switched, “Format” is set asfollows.59.94Hz 50Hz1080/59.94p( i )  1080/50p( i )1080/59.94i  1080/50i720/59.94p  720/50p480/59.94p( i )  576/50p( i )480/59.94i  576/50i For details on how to change the frequency, refer to“Changing the frequency” (page 48).