Panasonic AW-HE120KE Operating Instructions Manual

Also see for AW-HE120KE: Operating instructions Operating instructions

Contents

Panasonic AW-HE120KE Operating Instructions Manual Manual pdf 7 page image

7ShootingHow to turn the power on and off Turning the power onWhen performing the operationsusing the wireless remote control1 Set all the power switches of the units anddevices connected in the system to ON. This unit does not have a power switch.When power is supplied to it, the status display lampwill light up orange, and the unit is set to the standbymode.2 Press one of the [CAM1] to [CAM4] buttons onthe wireless remote control to select the unit.3 Press the [ON/STANDBY] button on thewireless remote control for 2 seconds.The POWER ON mode is established, images areoutput, and control can be exercised. The unit’s status display lamp now lights up green. It takes maximum 30 seconds per unit for the initialsettings operation to be completed.During this period, the unit cannot be operated.(Status display lamp: light up orange) When operation is transferred to the STANDBYmode: The current zoom, focus and iris positionsare stored in the memory (POWER ON preset). When operation is transferred to the POWER ONmode: The zoom, focus and iris are adjusted tothe positions which were stored in the memory(POWER ON preset) when operation wastransferred to the STANDBY mode.Notes4 If a multiple number of units are going to beused, repeat steps 2 and 3 as required.The unit’s status display lamp blinks green when a signalmatched by the remote control ID has been received, andit blinks orange when a signal that is not matched by theremote control ID has been received.When performing the operations using the controllerWhen the AW-RP655 or AW-RP555 is connected:1 Set all the power switches of the units anddevices connected in the system to ON. This unit does not have a power switch.When power is supplied to it, the status display lampwill light up orange, and the unit is set to the standbymode.2 Set the [OPERATE] switch on the controller toON.The POWER ON mode is established, images areoutput, and control can be exercised. The unit’s status display lamp now lights up green. It takes maximum 30 seconds per unit for the initialsettings operation to be completed.During this period, the unit cannot be operated.(Status display lamp: light up orange) When operation is transferred to the STANDBYmode: The current zoom, focus and iris positionsare stored in the memory (POWER ON preset). When operation is transferred to the POWER ONmode: The zoom, focus and iris are adjusted tothe positions which were stored in the memory(POWER ON preset) when operation wastransferred to the STANDBY mode.NotesBefore setting the [OPERATE] switch on the controller to ON,be absolutely sure to set all the power switches of the unitsand devices connected in the system to ON.For further details, refer to the Operating Instructions of thecontroller.When the AW-RP50 is connected:Refer to the Operating Instructions of the controller.