Panasonic AW-HE120KE Operating Instructions Manual

Also see for AW-HE120KE: Operating instructions Operating instructions

Contents

Panasonic AW-HE120KE Operating Instructions Manual Manual pdf 8 page image

8How to turn the power on and off (continued) Turning the power offWhen performing the operationsusing the wireless remote control1 Press one of the [CAM1] to [CAM4] buttons onthe wireless remote control to select the unit.2 Press the [ON/STANDBY] button on thewireless remote control for 2 seconds.The unit is set to the standby mode. The unit’s status display lamp now lights up orange.3 If a multiple number of units are going to beused, repeat steps 1 and 2 as required.4 Set all the power switches of the units anddevices connected in the system to OFF. This unit does not have a power switch. When operation is transferred to the STANDBYmode: The current zoom, focus and iris positionsare stored in the memory (POWER ON preset). When operation is transferred to the POWER ONmode: The zoom, focus and iris are adjusted tothe positions which were stored in the memory(POWER ON preset) when operation wastransferred to the STANDBY mode.NotesWhen performing the operations using the controllerWhen the AW-RP655 or AW-RP555 is connected:1 Set the [OPERATE] switch on the controller toOFF.All the cameras (including the unit) connected to thecontroller are set to the standby mode. The unit’s status display lamp now lights up orange.2 Set all the power switches of the units anddevices connected in the system to OFF. This unit does not have a power switch. When operation is transferred to the STANDBYmode: The current zoom, focus and iris positionsare stored in the memory (POWER ON preset). When operation is transferred to the POWER ONmode: The zoom, focus and iris are adjusted tothe positions which were stored in the memory(POWER ON preset) when operation wastransferred to the STANDBY mode.NotesFor further details, refer to the Operating Instructions of thecontroller.When the AW-RP50 is connected:Refer to the Operating Instructions of the controller.