37 (E)Setting the menu itemsww Setting the menu itemsWhen the unit’s settings are to be selected, the menus aredisplayed on the monitor.The monitor is connected to the video signal outputconnector.The basic menu operations involve displaying sub‑menusfrom the Top Menu items, and selecting settings on thesub‑menus.Some sub‑menus have menu items for performing moredetailed settings.For details on the basic operations to display the menusand change the items using the wireless remote control orcontroller (AW‑RP655, AW‑RP555 or AW‑RP50), refer topages 29 to 36.The “ ” and “ ” marks in the menu titles indicate thehierarchical level of the menu currently displayed.For instance, “ ” indicates the firsthierarchical level whereas “ ” and“ ” indicate that the second hierarchicallevel is now displayed.Menu items accompanied by a “ ” mark indicate datawhich is stored on a scene by scene basis; menu itemsaccompanied by a “ ” mark indicate data which is storedtogether for one camera regardless of the scenes.ww Top MenuTop MenuCamera Scene: FullAutoSystemMaintenanceCameraSelect this to open the camera menu relating to thecamera images.SystemSelect this to display the System menu used to adjust thegenlock (external synchronization) phase or establish thecamera output image settings.MaintenanceSelect this to display the Maintenance menu used tocheck the camera’s firmware version or initialize itssettings.wp The Top Menu does not have a “Return” setting.To close the menu screen, use the controller toperform the operation to close the menu screen.For details, refer to pages 29 to 36.Note
