41 (E)Setting the menu itemsww Picture 2/2 screenPicture 2/2Pedestal 0DRS OffGamma Type NormalGamma Level MidBack Light COMP. OffReturnPedestal [–10 to +10]This item is used to adjust the black level (adjust thepedestal) so that the dark parts of the images are easierto see.These parts become darker when a negative setting isselected and, conversely, lighter when a positive settingis selected.DRS [Off, Low, High]Set here is the DRS function which provides just the rightamount of compensation when images with significantlight/dark differences are displayed.When “Low” or “High” is selected, the effect is enhancedeven more.This may make noise more perceptible with some scenes.Gamma Type [Off, Normal, Cinema]Selected here is the type of gamma curve.The selected setting takes effect when “Off” is selectedas the “DRS” item setting. Normally, the “Normal” settingis used. When “Cinema” is selected, images giving off anatmosphere like movies can be shot.Gamma Level [Low, Mid, High]This item is used to adjust the gamma compensationlevel. The selected setting takes effect when “Off” isselected as the “DRS” item setting or when “Normal” isselected as the “Gamma Type” setting.When “Low” is set, the images appear sedate andcomposed. The resulting gamma curve has a gentlegradient in the low‑brightness areas, and the contrast issharper.Conversely, when “High” is set, the tonal range in the darkarea is expanded so that the images take on a lightertone. The resulting gamma curve has a sharp gradient inthe low‑brightness areas, and the contrast is softer.Back Light COMP. [Off, On]“On” or “Off” is set here for the backlight compensationfunction.Under backlight conditions, the function preventsdarkening as a result of light striking the backs ofsubjects, and makes it possible to shoot images in shadeor shadow more brightly.The function takes effect when “Auto” has been selectedas the Contrast Mode, Gain or Frame Mix item setting.ReturnUse this to return to the previous menu.ww System screenThis menu has items that relate to the genlock phaseadjustment and camera’s output image settings.SystemGenlockOutputOtherReturnGenlock (AW‑HE50S only)This displays the Genlock screen on which to perform thephase adjustments.With the AW‑HE50H, this item cannot be selected.OutputThis displays the Output screen on which to select thecamera’s output image settings.OtherThis displays the Other screen on which to select thesettings for the installation status of the camera’s pan‑tilthead unit and operating speed as well as the settingsrelating to the other functions.ReturnUse this to return to the previous menu.
