81 (E)Setting/releasing the limitersww Releasing the limitersThe limiter positions that are set can be released byfollowing the steps below.When the position is released, the tally lamp blinks twice.1 Press one of the [CAM1] to [CAM4] buttons toselect the unit.2 Release the limiters by taking the steps below.wp Releasing the upper limit position of themovement rangePerform the steps in “Basic limiter operations”.(Press the [MENU] button quickly and then pressthe [] button for 2 seconds while holding down the[PRESET] button.)wp Releasing the lower limit position of themovement rangePerform the steps in “Basic limiter operations”.(Press the [MENU] button quickly and then pressthe [] button for 2 seconds while holding down the[PRESET] button.)wp Releasing the left‑most limit position of themovement rangePerform the steps in “Basic limiter operations”.(Press the [MENU] button quickly and then pressthe [] button for 2 seconds while holding down the[PRESET] button.)wp Releasing the right‑most limit position of themovement rangePerform the steps in “Basic limiter operations”.(Press the [MENU] button quickly and then pressthe [] button for 2 seconds while holding down the[PRESET] button.)ww Resetting the limitersTo reset the limiters, the currently established settings mustbe released.The limiter positions that are set can be reset by followingthe steps below.1 Release the settings of the limiter positions tobe reset by following the steps in “Releasingthe limiters”.2 Set the limiter positions by following the stepsin “Setting the limiters”.
