54 (E)ENGLISHWeb setting screenp Control pad and its buttonsTo adjust the image in the horizontalor vertical direction (panning ortilting), left‑click the pad and thebuttons.The more the outside of the padis clicked, the faster the cameraoperates. Adjustment is also possibleby dragging the mouse.Right‑click the pad to initiatezooming and focusing.When the top half of the pad isclicked in the up or down direction,the zoom (magnification) is adjustedin the Tele direction; conversely,when the bottom half of the pad isadjusted, the zoom is adjusted in theWide direction.When the left half of the pad isclicked in the left or right direction,the focus is adjusted in the Neardirection; conversely when the righthalf of the pad is adjusted, the focusis adjusted in the Far direction.The zooming can also be adjustedby operating the mouse wheel.wp When the mouse is used for dragging anddropping from the control pad area to a positionoutside this area, the panning, tilting and otheroperations will not stop.In a case like this, click the control pad area tostop these operations.Notep PresetWhen the preset position is selected fromthe pull‑down menu and the Move button isclicked, the camera direction moves to thepreset position which was registered aheadof time.This is used to register the current statusin the preset position now selected on thepull‑down menu.It does not function if “Home” has beenselected on the pull‑down menu.The camera direction moves to the presetposition which is now selected on thepull‑down menu.The settings that are reproduced at thisposition are the settings which wereestablished on the “Preset Scope” menu(see page 64).The camera direction moves to the homeposition if “Home” has been selected on thepull‑down menu.p BrightnessUse this to adjust the image brightnessmanually.Use this to make the image darker.It does not work during automaticadjustments.Use this to make the image lighter.It does not work during automaticadjustments.Use this to adjust the image brightnessautomatically.
